SP60-3B
Multi-channel Pump with Solenoid Valve
Online consultation
Download

Product Introduction

It is a programmable, open-architecture, precision liquid handling unit, which is controlled by external computer or microprocessor to realize automatic pipetting, dilution and dispensing functions.

  • Simultaneous processing multiple liquids
  • Photoelectric encoder detects out of step
  • Controllable start speed, maximum speed and stop speed
  • Programmable acceleration and deceleration slopes
  • Can realize planned maintenance and replacement of syringes

Technical Parameter

Accuracy Error ≤±0.1%(stroke≥30% maximum stroke)
Max. stroke(Steps) 60mm(6000 steps or 48000 steps)
Linear speed range 0.01mm/s-60mm/s
Run time per stroke 1.25s-100min
Speed resolution 0.01mm/s
Stroke resolution 0.01mm or 0.00125mm
Valve switch time ≤250 ms between adjacent ports
Valves type Electromagnetic valve
Valve material Valve body: PEEK; Diaphragm: FKM; Sealing ring: FKM
Tubing fittings 1/4-28UNF
Syringe fittings 1/4-28UNF
Power supply DC24V±10%/2.5A (Peak value)
Communication interface RS232/RS485/CAN
Syringes 50μL,100μL,250μL,500μL,1.0mL,2.5mL,5.0mL
Syringe material Barrel material: Borosilicate glass; Plunger rod material: Stainless steel; Plunger seal material: PTFE
Baud rate 9600 or 38400(RS232/RS485); 100K,125K,250K,500K,1M(CAN)
Addressing UP to 15 individual addresses available(BCD switch)
Input Two TTL level signal inputs, for restart the paused instruct
Output Three TTL level signal outputs, for synchronous external devices
Valve body rated pressure 0.2MPa
Condition temperature 15℃~40℃(Low temperature operation requires a low temperature syringe)
Storage temperature -20℃~65℃
Relative humidity <80%(RH)
Channel number 3
Dimension(L*W*H) 126*94*263

Dimension（Unit：mm）