SPM
- Product Introduction
- Technical Parameter
- Applicable Syringes
- Dimension
Product Introduction
4.3 inch industrial-grade touch screen control, compact design. Display 8 pump units working parameters and working state in same screen. Friendly interface, easy operation. Split-type design, mainly for laboratory.
- Each unit working independently, can set one or some units freely. Each unit can infuse or withdraw different volume in same time or different time.
- Intelligent calibration, ensure infuse volume accuracy. Online micro adjusting function, convenient to adjust the volume of one units, decrease volume error.
- Real time monitor, animate display monitor result. Controller can receive traffic alarm of each unit.
- Back distance setting, can exclude bubbles inside syringe, improve volume accuracy.
- Fast forward and backward function used for loading syringe, washing and unlock traffic protection.
Technical Parameter
| Working mode (Five) | Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion. |
| Pump unit | 1-8 optional |
| Syringe size | ZU-I: 0.5μL-60mL; ZU-I-G1: 250μL-25mL; ZU-I-G2: 50mL |
| Syringe selection | Syringe size and customized diameter |
| Linear speed range | 1μm/min-132mm/min (Flow rate=Linear speed* syringe inner cut area) |
| Min. linear rate | 1μm/min |
| Linear force | ≥16kgf |
| Max. stroke | 90mm |
| Stroke resolution | 0.078μm/μstep |
| Accuracy | Stroke≥30% maximum stroke, Error≤±0.5% |
| Back distance | 0.01-5mm |
| Working mode | Independent working mode |
| Stored modes | Can save 10 group working modes |
| Display | Industrial grade 4.3"LCD color display |
| Control method | Touch screen and Mechanical keypad |
| Power-off memory | Display the previous data parameter after power on again |
| External control signal | Start/stop signal, active switch signal: (5-24V) |
| Communication interface | RS232/RS485, Modbus protocol(RTU mode) |
| Controller power supply | DC5V/10W |
| Pump unit power supply | DC24V/30W |
| Condition temperature | 0-40℃ |
| Relative humidity | <80% |
| IP rate | IP31 |
| Controller dimension | 160×150×95(mm) |
| Controller weight | 1.0kg |
| Pump unit dimension | 257×110×131 (mm) |
| Pump unit weight | 3.0kg |
Applicable Syringes
|
Syringe
|
Inside Diameterr(mm)
|
Flow Rate(μL/min-mL/min)
|
|
1mL
|
4.70
|
0.0174-2.29
|
|
2mL
|
9.70
|
0.0739-9.755
|
|
5mL
|
12.48
|
0.1223-16.147
|
|
10mL
|
15.89
|
0.1983-26.177
|
|
20mL
|
20.00
|
0.3142-41.469
|
|
30mL
|
22.50
|
0.3976-52.484
|
|
50mL
|
28.90
|
0.6560-86.588
|
Dimension（Unit：mm）
